[gstlhpg1] MP:CM> uc -delete Oper -nc
UC -delete Oper -nc
Current User Parameters:
User Login ID
User Password
User Name
User Workgroup
User Access Rights
User Operating Mode
User Enabled/Disabled : Enabled
-> Current User will be deleted
User may be disconnected in this process
-> User Configuration has been updated.
-> Command successful.
[gstlhpg1] MP:CM>
See also: CA, SO, LDAP
WHO: Display a list of iLO 2 connected users
Command access level: Login access
WHO displays the login name of the connected console client users, the ports on which they are
connected, and the mode used for the connection.
•
Login name
•
Login type (LDAP or local authentication)
•
User access rights
•
Connection port (local, remote, Telnet, web, SSH)
•
IP address (for Telnet, web, SSH)
•
Current MP mode that user is in (MA-MP Main Menu, CM-Command menu, LIVE-live
event viewer, VFP-VFP mode)
For LAN and serial console clients, the command displays the IP address. When DNS is integrated,
the host name appears as well.
The local port now requires a login. A user must be logged into the system, or no local port
displays.
Command line usage and scripting:
WHO [ -nc ]
-?
See also: DI, TE
XD: iLO 2 Diagnostics or reset
Command access level: MP configuration access for resetting the iLO 2, console access for all
other XD options
XD performs simple checks to confirm the iLO 2 health and its connectivity status. The following
tests are available:
•
iLO 2 Parameter Checksum in NVRAM
•
Verify I2C connection (get BMC device ID)
•
LAN connectivity test using the ping command
108
Using iLO 2
: Oper
: ************
: Default Operator
:
: Console access, Virtual Media
: Multiple