Additional Setup; Modifying User Accounts And Default Passwords - HP Integrity BL870c Operation Manual

User Creation
User Login
User Deletion

Additional Setup

This section provides additional information to set up iLO 2.

Modifying User Accounts and Default Passwords

Integrity iLO 2 comes preconfigured with default factory settings, including a default user account
and password. The two default user accounts on initial login are:
• All Rights (Administrator) level user:
login = Admin
password = Admin
• Console Rights (Operator) level user:
login = Oper
password = Oper
Login and password are case sensitive.
TIP:
For security reasons, HP strongly recommends you modify the default settings during the
initial login session.
Make the following changes using any of the iLO 2 user interfaces.
To modify default account configuration settings, follow these steps:
1. Log in as the administrator to modify default user configuration settings
2. To modify default passwords, follow these steps:
When the OA sends a request to iLO 2 to create a new user, iLO 2 attempts
to create a user in the local iLO 2 user database. Creation of an OA user
could fail for a number of reasons:
• The local user database is disabled in iLO 2 and LDAP authentication
is being used.
• The iLO 2 user database has reached the maximum number of users
(19 users).
• There is already a user registered with the same login name.
After an OA user has been created in the iLO 2 database, the OA user login
can still fail for a number of reasons:
• The iLO 2 upgrade is currently in progress, and no new connections
are allowed.
• Maximum number of connections for the requested connection type
(SSH, Telnet, web GUI) to iLO 2 has been reached.
• Requested connection type (SSH, Telnet or web) to iLO 2 is currently
disabled.
When the OA sends a request to iLO 2 to delete a user, iLO 2 attempts to
delete that user from the local iLO 2 user database. Deletion of an OA user
could fail for a number of reasons:
• A user with the specified login does not exist (user could have been
deleted through other iLO 2 user interface).
• The specified user cannot be deleted because it is the only user in the
local database with user administration right.
Additional Setup 51