Cddr1 Properties - HP Integrity BL870c Operation Manual

Table 8-53 cddr1 Properties
Property Name
oemhp_image
oemhp_connect
oemhp_applet_connected
Verbs
set Sets a property to a specific value.
show Displays information.
help Displays context-sensitive help.
Using Scriptable vMedia on Server Blades and Rack-Mounted Servers
The following examples show actions you can perform using SM CLP for vMedia on server
blades and on rack-mounted servers.
Change the current context to point to the SMCLP target representing the virtual the CD drive
–> cd / map1 / oemhp_vm1 / cddr1
Display / map1 / oemhp_vm1 / cddr1 target properties and show the current status to
verify that the media is not in use
–> show
Insert the desired image into the drive
–> set oemhp_image=http://<Apache server ip address>/cgi-bin/ISO/install_disk1.iso
Connect to the media
–> set / oemhp_connect=yes
NOTE: The oemhp_applet_connected has a value equal to yes.
If you attempt to connect when there is no valid image location set in the oemhp_image
property, you will receive an error.
Disconnect vMedia
This command disconnects the media and clears the oemhp_image value.
–> set / map1 / oemhp_vm1 / cddr1 oemhp_connect=no
NOTE: If you attempt to disconnect when the drive is not connected, you will receive an
error.
Using Scriptable vMedia on Server Blades Only
This section provides information on using scriptable vMedia on server blades only.
On HP Integrity server blades, all iLO 2 functions are available on the Onboard Administrator
(OA).
The OA presents its bootable physical CD/DVD media as an ISO image. DVD/CD connect and
disconnect sequences are initiated from the OA by the OA user. The drives (connected ISO
Description
The image path and name for vMedia
access.
Used to connect or disconnect a vMedia
device and display the connection status.
Indicates if the Java applet is connected.
SMASH Server Management Command Line Protocol
Access and Values
Read/write
The value is a URL with a maximum length
of 80 characters.
Read/write
The following are valid values:
• Yes: Connect.
• No: Disconnect.
Read-only
Set to:
• Yes
• No
173