Resetting Ilo 2; Text Console Services; Opening The Mp Main Menu From Sm Clp; Target: Map1/Textredirectsap1 - HP Integrity BL870c Operation Manual

Resetting iLO 2

To reset iLO 2, run the reset command to the MAP1 target as in the following example:
</>hpiLO-> reset map1
status=0
status_tab=COMMAND COMPLETED
iLO was issued a reset

Text Console Services

This section describes targets, their properties, and supported verbs necessary to implement the
console services in SM CLP.
You can invoke the system console and the MP Main Menu from SM CLP.
Any text console service is represented by a dedicated to it textredirectsap target.
Target /map1/textredirectsvc1 represents iLO 2's ability to provide text console redirection
service.

Opening the MP Main Menu from SM CLP

This section provides information on how to invoke the MP Main Menu from the SM CLP.

Target: map1/textredirectsap1

The textredirectsap1 target represents the MP Main Menu interface.
Table 8-38 shows textredirectsap1 target properties.
Table 8-38 /map1/textredirectsap1 Properties
Property Name
EnabledState
SessionTerminateSequence
Description
Name
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.
start Switch to MP Main Menu.

Opening the System Console Interface from SM CLP

This section provides information on how to open the system console from the SM CLP.

Target: system1/consoles1/textredirectsap1

This target represents the system text console (currently launched through the iLO 2 CO command).
Table 8-39 shows textredirectsap1 target properties.
Description
Shows whether the text redirection is enabled.
A string sequence used for terminating text
redirection session and returning to SM CLP.
Description of this text redirection service
access point.
Uniquely identifies this access point.
SMASH Server Management Command Line Protocol
Access and Values
Read-only
The value is set to Enabled.
Read-only
The value is set to SMCLP.
Enter SMCLP at the MP Main Menu to
return to the SM CLP interface.
Read-only
The value is set to MP Main Menu
Interface.
Read-only
The value is set to MP Main Menu
161