User Account Examples; Ldap Configuration; Target: Map1/Settings1/Oemhp_Ldapsettings1 - HP Integrity BL870c Operation Manual

Table 8-55 account# Properties (continued)
Property Name
Name
oemhp_privileges
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.
set Sets a property to a specific value.
create Create a new user account.
delete Delete a user account.

User Account Examples

The following examples show specific user account commands.
Display all user accounts on this iLO 2
</> hpiLO-> show /map1/group1/account*
Create a new account
</map1/group1> hpiLO-> create account3 userid=testuser userpassword=testpass
name="Test User" oemhp_privileges=console,power
Delete an account
</map1/group1> hpiLO-> delete account1
Modify account properties
</map1/group1/accuont3> hpiLO-> set oemhp_privileges=console name="Console User"

LDAP Configuration

This section describes targets, their properties, and supported verbs used for configuring and
viewing iLO 2 LDAP settings using SM CLP.
NOTE:
You can only configure LDAP with extended HP schema from the SM CLP interface.
You can configure LDAP with default schema using the iLO 2 web GUI or the iLO 2 MP TUI
Command menu.

Target: map1/settings1/oemhp_ldapsettings1

The oemhp_ldapsettings1 target represents iLO 2 LDAP directory configuration settings.
Table 8-56 shows oemhp_ldapsettings1 target information.
Description
User name of this account.
Privileges of this user account.
Access and Values
Read/write.
Specified in ASCII characters up to 24 characters long.
Read/write.
The following are valid values:
<console,power,mp,user,virtual),
<all> or <none>.
SMASH Server Management Command Line Protocol 177