User Accounts Configuration; Target: Map1/Group1; Target: Map1/Group1/Account; Group1 Properties - HP Integrity BL870c Operation Manual

• The vMedia feature is supported using the USB 1.1 protocol (since MP FW uses Philips 1181
USB device). As a result, USB 2.0 is not currently supported.
• DVD appears as the large CD.
• Currently there is no support on fully compliant DVD.
Typical Scriptable vMedia Usage
Using the scriptable vMedia feature, you can perform the following:
Deploying Operating Systems
• Installing (RHEL and SLES) Linux using ISO images
• Installing (RHEL and SLES) Linux using a set of physical CDs
• Installing Windows Server 2003 using Re-install Media using CD
• Installing Windows Server 2003 using Re-install Media using ISO image
• Installing Windows Server 2003 using Smart-setup and RTM-bit physical CDs
• Installing Windows Server 2003 using Smart-setup and RTM-bit ISO images
• Installing HP-UX using a physical CD
• Installing HP-UX using ISO images
Installing an Application

User Accounts Configuration

This section describes targets, their properties, and supported verbs used for configuring and
viewing iLO 2 user accounts using SM CLP.

Target: map1/group1

The group1 target represents a collection of user accounts on iLO 2.
Table 8-54 shows group1 target information.
Table 8-54 group1 Properties
Property Name
Description
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.

Target: map1/group1/account#

The account# target represents a user account on this iLO 2 where # is the instance number of
the specific account. You can configure up to 19 user accounts on the iLO 2.
Table 8-55 shows account# target properties.
Table 8-55 account# Properties
Property Name
UserID
UserPassword
176 Using iLO 2
Installing MS SQL Server from an MSDN DVD
Description
Textual description of this collection
target.
Description
Login name of this user
account.
User password.
Read-only
Set to collection of user accounts.
Access and Values
Read/write.
Specified in ASCII characters up to 24 characters long.
Read/write.
Specified in ASCII characters and must be least six characters long.
Access and Values