NOTE:
After you install the snap-ins, restart ConsoleOne and MMC to display the new entries.
After the snap-in is installed, you can create iLO 2 objects and roles in the directory. Using the
Users and Computers tool, you can:
•
Create iLO 2 objects and role objects.
•
Add users to the role objects.
•
Set the rights and restrictions of the role objects.
Active Directory Snap-Ins
The following sections discuss the additional management options available in Active Directory
Users and Computers after you have installed the HP snap-ins.
Managing HP Devices In a Role
To add HP devices to be managed in a role, use the HP Devices tab
•
To browse to a specific HP device and add it to the list of member devices, click Add.
•
To browse to a specific HP device and remove it from the list of member devices, click
Remove.
Figure 9-8 HP Devices Tab
Managing Users In a Role
After user objects are created, use the Members tab
role.
•
To add a user, browse to the specific user you want to add, and click Add.
•
To remove a user from the list of valid members, highlight an existing user and click Remove.
190
Installing and Configuring Directory Services
(Figure
(Figure
9-9) to manage the users within the
9-8).