Sysrev: Firmware Revisions; Tc: System Reset Through Init Or Toc Signal; Te: Send A Message To Other Mirroring Terminals; Uc: User Configuration (Users, Passwords, And So On) - HP Integrity BL870c Operation Manual

SS [ -nc ]
-?
See also: PS

SYSREV: Firmware revisions

Command access level: Login access
SYSREV displays the current firmware revisions in the system.
Command line usage and scripting:
SYSREV [ -nc ]
-?
Example:
MP:CM> SYSREV
Current firmware revisions
MP FW : F.01.57
BMC FW : 75.12
EFI FW : ROM A 05.63, ROM B 05.60
System FW : 01.40
PDH FW : 00.0d
UCIO FW : 03.0a
PRS FW : 00.08 UpSeqRev: 01, DownSeqRev: 01

TC: System reset through INIT or TOC signal

Command access level: MP configuration access
NOTE: During normal operation, shut down the OS before issuing this command.
TC resets the system through the INIT or TOC signal. Running this command irrecoverably halts
all system processing and I/O activity and restarts the computer system. It is different from the
RS command in that the processors are signaled to dump state as they shut down.
Command line usage and scripting:
TC [ -nc ]
-?
See also: RS

TE: Send a message to other mirroring terminals

Command access level: MP configuration access
TE treats all displayable characters following the command as a comment. Characters typed are
broadcast to the connected console clients when you press Enter. The string size is limited to 80
characters. Any extra characters are not broadcast to other console clients.
NOTE: The broadcast message is sent only to Command menu clients, and does not include
users connected to MP Main Menu functions.
Command line usage and scripting:
TE <text> [ -nc ]
-?

UC: User Configuration (users, passwords, and so on)

Command access level: User administration access
106 Using iLO 2