Slot Numbering - Juniper E120 - RELEASE 11.1.X HARDWARE GUIDE 3-25-2010 Hardware Manual

E series broadband services routers
Table of Contents

Advertisement

E120 and E320 11.1.x Hardware Guide
Figure 15: E120 Router, Rear View
Ground terminals
For details about available line modules, IOAs, and compatibility between line modules
and SRP modules, see the E120 and E320 Module Guide.

Slot Numbering

Slot numbering for the routers is similar.
30
Overview
Power distribution unit (PDU)
IOA
Blank filler panel
In the E320 router, modules mount vertically in a 15–slot chassis, numbered left
to right (0–16). See Figure 16 on page 31 and Table 3 on page 31 for slot
locations. Because two half-height IOAs can be installed in a slot, the upper bay
is designated Adapter 0 and the lower bay is designated Adapter 1. The router
does not have slot groups.
SRP module
Left IOA bays
Right IOA bays
(Adapter 1)
ESD grounding jack
(Adapter 0)

Advertisement

Table of Contents
loading

This manual is also suitable for:

E120E320

Table of Contents