Juniper E120 - RELEASE 11.1.X HARDWARE GUIDE 3-25-2010 Hardware Manual page 108

E120 and E320 11.1.x Hardware Guide
Table 14: E120 Router Specifications (continued)
Category
Current
Power
Redundancy (input power)
Space Requirements
Airflow
NEBS Certification Level 3
Safety Agency Certification
Electromagnetic Emissions Agency
Certification
92
E120 Broadband Services Router Specifications
Specification
40 A @ –48 VDC
1920 W maximum
2 independent line feeds
3 feet (90 cm) behind router or rack
Do not block air vents on sides of the router
Do not place equipment that exhausts hot air to left on the right of the router.
Air intake occurs from the right side of the router.
Air is exhausted out of the left side of the router.
Pending
AS/NZS 60950:2000 Safety of Information Technology Equipment
CAN/CSA-C22.2, No. 60950-1–03, First Edition, Information Technology Equipment
- Safety - Part 1: General Requirements
EN60825-1, Safety of Laser Products - Part 1: Equipment Class, Requirements,
and User's Guide (2001)
EN 60950-1:2001, First Edition, Information Technology Equipment - Safety - Part
1: General Requirements
IEC 60950-1(2001-10) Ed. 1.0 Information Technology Equipment - Safety - Part 1:
General Requirements
Low Voltage Directive (73/23/EEC)
UL 60950-1, First Edition, Information Technology Equipment - Safety - Part 1:
General Requirements
AS/NZS CISPR 22:2004
EMC Directive (89/336/EEC)
EN 300 132–2 (Narrowband and Wideband)
EN55022 Class A (CISPR-22 Class A)
EN55024, Annex C for WAN Equipment Performance Criteria A, B, and C
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-6
ETSI 300-386, Telecommunication Network Equipment; ElectroMagnetic
Compatibility (EMC) requirements
FCC Part 15 Class A
IECS-03 Issue 3 Class A
VCCI (Voluntary Control Council for Interference by Information Technology
Equipment)