Maintaining The Router; Required Tools And Items; Storing Modules And Components - Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - E120 AND E320 HARDWARE GUIDE REV 9-29-2010 Hardware Manual

E series broadband services routers

Table of Contents

CHAPTER 8

Maintaining the Router

This chapter lists the tools, items, and steps needed for installing and uninstalling router

components. Other maintenance procedures must be performed by an authorized Juniper

Networks technician.

This chapter contains the following sections:

You need the following tools and other items to replace router components:

Flathead and No. 2 Phillips screwdrivers

Insulated adjustable wrench

Antistatic wrist strap

Antistatic bags (or other protective packaging to hold components)

Plastic boots or other protective covers for fiber-optic SC and LC connectors

Retain the packaging in which a module or component was shipped, and use this

packaging to store the item. Modules are shipped in antistatic bags and protective

packaging. Components, such as transceivers and nonvolatile storage (NVS) cards, are

shipped in antistatic plastic containers within an antistatic padded box.

Table of Contents

E120 E320