Module Combinations - Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - E120 AND E320 HARDWARE GUIDE REV 9-29-2010 Hardware Manual

E series broadband services routers
Table of Contents

Advertisement

Table 4: IOA Locations and Combinations (continued)
Upper/Right Bay
IOA
(Adapter 0)
ES2-S1 10GE
Yes
(Full-height IOA)
ES2-S2 10GE PR
Yes
(Full-height IOA)
ES2-S1 OC3-8 STM1
Yes
ATM
ES2-S1 OC12-2 STM4
Yes
ATM
ES2-S1 OC12-2 STM4
Yes
POS
ES2-S1 OC48 STM16
Yes
POS
ES2-S1 SERVICE
Yes
(Full-height IOA)
ES2-S1 REDUND
Yes
(Full-height IOA;
slots 0 and 11
only)

Module Combinations

Table 5: Module Combinations
Modules
SRP Modules
SRP-100
This module is only
supported in the E320 router.
Copyright © 2010, Juniper Networks, Inc.
Lower/Left Bay
(Adapter 1)
Not applicable
Not applicable
Yes
Yes
Yes
Yes
Not applicable
Not applicable
Line modules can only be paired with specific IOA, SFM, and SRP modules. See Table 5
on page 31 for valid combinations.
ES2 4G LM
ES2 10G UPLINK LM
Combined with
Both Bays
Other IOAs in
Concurrently
Same Slot
Not applicable
Not applicable
Not applicable
Not applicable
Yes
Yes (GE-8,
OC3/STM1, and
OC12/STM4 IOAs
only)
Yes
Yes (GE-8,
OC3/STM1, and
OC12/STM4 IOAs
only)
Yes
Yes (GE-8,
OC3/STM1, and
OC12/STM4 IOAs
only)
No
No
Not applicable
Not applicable
Not applicable
Not applicable
ES2 10G LM
Chapter 4: Installing Modules
Hot-Swapping
Support
No
No
Yes
Yes
Yes
Yes
No
No
ES2 10G ADV LM
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

E120E320

Table of Contents