NETGEAR GSM7228PS Software Administration Manual page 73

Managed switch release 8.0.3

Hide thumbs Also See for GSM7228PS:

Table of Contents

ProSafe 7000 Managed Switch Release 8.0.3

a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to

the following displays.

b. Scroll down and select the interface 1/0/4 check box. Now 1/0/4 appears in the

Interface field at the top.

c. Enter the following information:

In the IP Address field, enter 192.64.4.1.

In the Network Mask field, enter 255.255.255.0.

In the Admin Mode field, select Enable.

d. Click Apply to save the settings.

Specify the router ID, and enable OSPF for the switch.

a. Select Routing > OSPF > Advanced > OSPF Configuration. A screen similar to the

following displays.

b. Under OSPF Configuration, enter the following information:

In the Router ID field, enter 192.130.1.1.

In the OSPF Admin Mode field, select Enable .

In the RFC 1583 Compatibility field, select Disable.

Chapter 7. OSPF