NETGEAR GSM7228PS Software Administration Manual page 454

Web Interface: Configure MLD Snooping
1. Create VLAN 300.
a. Select Switching > VLAN > Basic > VLAN Configuration. A screen similar to the
following displays.
b. In the VLAN ID field, enter 300.
c. Click Add.
2. Assign all of the ports to VLAN 300.
a. Select Switching > VLAN > Advanced > VLAN Membership. A screen similar to the
following displays.
b. In the VLAN ID list, select 300.
c. Click Unit 1. The ports display.
d. Click the gray boxes under ports 1 and 24 until U displays. The U specifies that the
egress packet is untagged for the port.
e. Click Apply.
3. Assign PVID to ports 1/0/1 and 1/0/24.
454 | Chapter 28. MLD
ProSafe 7000 Managed Switch Release 8.0.3