NETGEAR GSM7228PS Software Administration Manual page 240

a. Select Routing > Advanced > IP Interface Configuration. A screen similar to the
following displays.
b. Scroll down and select the interface 1/0/19 check box. Now 1/0/19 appears in the
Interface field at the top.
c. Enter the following information:
• In the IP Address field, enter 10.100.5.33.
• In the Subnet Mask field, enter 255.255.255.0.
• In the Routing Mode field, select Enable.
d. Click Apply to save the settings.
4. Create an authentication name list.
a. Select Security > Management Security > Login > Authentication List. A screen
similar to the following displays.
b. Select the check box before dot1xList.
c. In the 1 list, select Radius.
d. Click Apply.
5. Set port 1/0/19 to force authorized mode. (In this case, the RADIUS server is connected to
this interface.)
240 | Chapter 14. Security Management
ProSafe 7000 Managed Switch Release 8.0.3