NETGEAR GSM7228PS Software Administration Manual page 442

a. Select Routing > IP > Basic > IP Configuration. A screen similar to the following
displays.
b. For Routing Mode, select the Enable radio button.
c. Click Apply.
2. Enable IPv6 unicast routing on the switch.
a. Select Routing > IPv6 > Basic > Global Configuration. A screen similar to the
following displays.
b. For IPv6 Unicast Routing, select the Enable radio button.
c. Click Apply.
3. Configure 1/0/1 and 1/0/13 as a IPv6 routing ports.
a. Select Routing > IPv6 > Advanced > Interface Configuration. A screen similar to
the following displays.
442 | Chapter 28. MLD
ProSafe 7000 Managed Switch Release 8.0.3