c. Click Add.
3.
Enable the IGMP snooping querier globally.
a. Select Switching > Multicast > IGMP Snooping > IGMP VLAN Configuration. A
screen similar to the following displays.
b. Enter the following information:
•
For Querier Admin Mode, select the Enable radio button.
•
In the Querier IP Address field, enter 10.10.10.1.
c. Click Apply.
4.
Enable the IGMP snooping querier on VLAN 1.
a. Select Switching > Multicast > IGMP Snooping Querier VLAN Configuration. A
screen similar to the following displays.
b. In the VLAN ID field, enter 1.
5.
Click Add.
224 |
Chapter 13. IGMP Snooping and Querier
ProSafe 7000 Managed Switch Release 8.0.3