NETGEAR GSM7228PS Software Administration Manual page 69

ProSafe 7000 Managed Switch Release 8.0.3
c. Click Apply to save the settings.
5. Enable OSPF on port 1/0/2.
a. Select Routing > OSPF > Advanced > Interface Configuration. A screen similar to
the following displays.
b. Scroll downand select the interface 1/0/2 check box. Now 1/0/2 appears in the
Interface field at the top.
• In the OSPF Area ID field, enter 0.0.0.2.
• In the the OSPF Admin Mode field, select Enable.
• In the Priority field, enter 128.
• In the Metric Cost field, enter 32.
c. Click Apply to save the settings.
6. Enable OSPF on port 1/0/3.
a. Select Routing > OSPF > Advanced > Interface Configuration. A screen similar to
the following displays.
b. Scroll down and select the interface 1/0/3 check box. Now 1/0/3 appears in the
Interface field at the top.
• In the OSPF Area ID field, enter 0.0.0.3.
• In the the OSPF Admin Mode field, select Enable.
Chapter 7. OSPF | 69