NETGEAR GSM7228PS Software Administration Manual page 360

Managed switch release 8.0.3

Hide thumbs Also See for GSM7228PS:

Table of Contents

a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to

the following displays.

b. Under IP Interface Configuration, scroll down and select the Port 1/0/1 check box.

Now 1/0/1 appears in the Interface field at the top.

In the IP Address field, enter 192.168.1.1.

In the Subnet Mask field, enter 255.255.255.0.

In the Routing Mode field, select Enable.

c. Click Apply.

Create a 6-in-4 tunnel interface.

a. Select Routing > IPv6 > Advanced > Tunnel Configuration. A screen similar to the

following displays.

b. In the Tunnel Id list, select 0.

c. In the Mode field, select 6-in-4-configured.

d. In the Source Address field, enter 192.168.1.1.

e. In the Destination Address field, enter 192.168.1.2.

f. Click Apply.

Assign an IPv6 address to the tunnel.

Chapter 24. Tunnel

ProSafe 7000 Managed Switch Release 8.0.3