Starting The Core Script Process - Novell SLRS 8 Admin Manual

– ls /tftpboot/boot
– ls /tftpboot/images
According to the example in Section
image and a java POS image should now be available on the BS.
Verify the LDAP settings, with the available POS images located below
the path /tftpboot/images.
Note: POS images must be activated, that POS clients are able to down-
load them from the branch server. After the installation and configura-
tion of the SLRS, initial entries for the browser and java POS image are
added to LDAP. These LDAP entries serve as example only!
further information how to activate POS images with PosAdmin refer to
Section 7.4 on page 95.
Expert: When later running possyncimages.pl, remember that distributing
new POS images from the AS to the branch servers is only one part of the action
needed to enable boot image version changes. The counterpart is to activate the
version changes inside the LDAP entries of the AS and to update the CR config
files that reside on the BS. Otherwise POS clients already registered in LDAP and
on the BS will not boot the new POS image version located below the /tftpboot
directory. For more details, refer to Section
page 75.

3.3.5 Starting the Core Script Process

To enable the registration of cash register systems the posleases2ldap script
has to be started manually. Execute the following command, which starts
posleases2ldap as a daemon process:
/etc/init.d/posleases2ldap
To enable that the core script is automatically started at boot time of the
branch server execute the following command:
chkconfig posleases2ldap on
Expert: The POS script posleases2ldap registers new CRs in LDAP and has
to be started as a daemon on the branch server. All other POS scripts are
controlled by posleases2ldap. For further information, refer to section
on page 49.
20
The POS system manufacturer will provide a script to add the required SLRS objects to
the LDAP directory during the configuration of the administration server. For information,
refer to the POS system manufacturer documentation.
3.3 Installation of the Branch Server
3.2.6 on page 30, the disknet boot
7.4 on page 95 and Section
20
For
6.4 on
4.5.1
37