Adding A Highly Available Branch Server Pair - Novell SLRS 8 Admin Manual

--scDnsName dns;C --scServiceName dns \
--scServiceStartScript named \
--scServiceStatus TRUE;
posAdmin.pl --user cn=admin,o=mycorp,c=de \
--password secret \
--base cn=bs,cn=server,cn=habor,ou=berlin,o=mycorp,c=de \
--add --scService --cn tftp --ipHostNumber 192.168.1.1 \
--scDnsName tftp --scServiceName tftp \
--scServiceStartScript atftpd \
--scServiceStatus TRUE;
posAdmin.pl --user cn=admin,o=mycorp,c=de \
--password secret \
--base cn=bs,cn=server,cn=habor,ou=berlin,o=mycorp,c=de \
--add --scService --cn dhcp --ipHostNumber 192.168.1.1 \
--scDnsName dhcp --scServiceName dhcp \
--scServiceStartScript dhcpd \
--scServiceStatus TRUE;

7.2.4 Adding a Highly Available Branch Server Pair

The difference between a branch server and a highly available branch server
pair is:
two servers
at least two network interface cards per server
instead of scService, scHAService
Compared with section
scServerContainer, for example, bs1 and bs2, as shown in the example be-
low:
## bs1
posAdmin.pl --user cn=admin,o=mycorp,c=de \
--password secret \
--base cn=server,cn=habor,ou=berlin,o=mycorp,c=de \
--add --scBranchServer --cn bs1
## bs2
posAdmin.pl --user cn=admin,o=mycorp,c=de \
--password secret \
--base cn=server,cn=habor,ou=berlin,o=mycorp,c=de \
--add --scBranchServer --cn bs2
7.2.3 on page 82 we had to add two servers in a
7.2 Basic Actions
85