Novell SLRS 8 Admin Manual page 97

Attribute
--base
--cn
--scImageName
--scPosImageVersion
--scDhcpOptionsRemote
--scDhcpOptionsLocal
--scImageFile
--scBsize
scConfigFile
Table 7.17: POS Image Attributes for PosAdmin
Type Explanation
must This is the base distinguished name of
the POS image object, for example,
cn=myjava,cn=global,o=mycorp,c=de.
must This is the common name of the POS im-
age, for example, myjava.
must This is the name of the POS image, for
example, myjava.
must This is the version number of the POS
image, followed by the flag passive
or active, for example, 1.1.2; active.
The version number and the flag are
semicolon-separted (';'). There are sev-
eral combinations possible of this at-
tribute, which are described in Table
on page 96.
must This is
POS client, the mandatory value is
/boot/pxelinux.0.
reserved This attribute is reserved for future ex-
tension of the SLRS and is actually not
used.
must This is the file name of the image, which
the CR will download from the branch
server, for example, myjava.
must Specifies the block size for the TFTP
download of the POS image, for exam-
ple, 8192.
(4KB) for image sizes <128MB, 8192
(8KB) for image sizes <256MB, 16384
(16KB) for image sizes < 512MB and
32768 (32KB) for image sizes <1GB.
Note: You have to select a TFTP block
size of 32KB for the full featured desk-
top image, because there is a limitation
of the block counter for TFTP.
must This specifies the path of the con-
fig file, for example, /ect/ntp.conf or
/etc/X11/XF86Config.
7.4 Managing Images
the boot option
Possible values are: 4096
7.16
of the
97