Updating The Slrs Base Software - Novell SLRS 8 Admin Manual

– Configure Host Name, for example, bs1
– Set Domain Name, such as store1.berlin.mycompany.mycorp.us
Note: It is very important to choose the same host name, domain
name, and IP address as defined in the LDAP database of the admin-
istration server. Otherwise, the initialization scripts will fail.
The software installation is done and you can log in as the user root.
Install the United Linux Service Pack 3 CD, as described in Section 3.3.1.
Afterwards proceed with Section
Expert: Refer to Section
and steps for getting the branch server installed and configured on your worksta-
tion.

3.3.1 Updating the SLRS Base Software

The actual version of the SLRS 8 is based on the SLES/UL Service Pack 3
and needs to be updated with the United Linux Service Pack 3 CD1 from the
SLRS 7-CD Set.
Future United Linux Service Packs can be used to update the installed SLRS
version on the BS. For new installations, only the latest Service Pack CD needs
to be installed.
To initiate the update, start the YaST or YaST2 Control Center (see Figure 3.2)
on page 26, for example, by executing the program from the command line
and selecting Software.
There are two ways updating the SLRS software: the Patch CD Update or
3.3 Installation of the Branch Server
3.3.3
5.2 on page 61, which describes the key requirements
Figure 3.4: YaST2 Online Update
to configure the branch server.
33