Novell SLRS 8 Admin Manual page 59

ldapsearch command or a GUI-based LDAP browser, such as GQ. For further
information about LDAP, refer to the corresponding manual pages.
The values o= and c= depend on your configuration. For example:
ldapsearch -x -h localhost -b cn=global,o=mycorp,c=de
The necessary GQ configuration to access the LDAP server is shown in the
example below:
General settings:
LDAP host: <IP Address of the AS>
LDAP Port: 389
Base DN: o=mycorp,c=de
Details:
Bind DN: cn=admin,o=mycorp,c=de
Bind Password: <admin password>
The installation and the base configuration of the administration server is
now finished. Chapter
database on the administration server to manage the corresponding branch
servers and cash registers.
To create appropriate LDAP entries for the branch server installation described
in the next section, posAdmin must be used as described below
posAdmin.pl --user cn=admin,o=mycorp,c=de --password secret \
--base o=mycorp,c=de \
--add --organizationalUnit --ou mycompany
posAdmin.pl --user cn=admin,o=mycorp,c=de --password secret \
--base ou=mycompany,o=mycorp,c=de \
--add --organizationalUnit --ou berlin
posAdmin.pl --user cn=admin,o=mycorp,c=de --password secret \
--base ou=berlin,ou=mycompany,o=mycorp,c=de \
--add --scLocation --cn berlin1 \
--ipNetworkNumber 192.168.2.0 --ipNetmaskNumber 255.255.255.0 \
--scDhcpRange 192.168.2.220,192.168.2.240 \
--scDhcpFixedRange 192.168.2.10,192.168.2.200 \
--scDefaultGw 192.168.2.253 --scDynamicIp TRUE \
1
The POS system manufacturer will provide a Vendor CD for SLRS with scripts and con-
figuration files which will generate the branch entries in LDAP. For information, refer to
the POS system manufacturer hardcopy documentation or the documentation on the OEM
vendor CD.
5.1 Installation of the Administration Server
7 describes the posAdmin tool for modifying the LDAP
1
:
59