Novell SLRS 8 Admin Manual page 127

CONF
Specifies a comma-separated list of source:target configuration files. The
source (src) corresponds to the file within the directory. The target
(dest) corresponds to an absolute path below the cash register image
to which it is saved.
PART
Specifies the partitioning data. The comma-separated list must contain
the size (size), the type number (id), and the mount point (Mount).
– The first element of the list must define the swap partition.
– The second element of the list must define the root partition.
– The swap partition must not contain a mount point. A lowercase x
must be set instead.
– If a partition should take all the space left on a disk, set a lowercase
x as the size specification.
JOURNAL
Specifies a journal to be added to the filesystem. The value for this
parameter must be set to ext3 because the only journaled filesystem we
are using is ext3. the JOURNAL parameter will be evaluated only if DISK
has been set as well.
DISK
Specifies the hard disk. Used only with PART and defines the device via
which the hard disk can be addressed, e.g., /dev/hda.
FEATURE
This optional parameter is only of interest while the cash register im-
age is created. The value of FEATURE is the value of the
option used for building the cash register image. For information, refer
to Chapter 10.
EXTEND
This optional parameter is only of interest while the cash register image
is created. The value of EXTEND is the value of the
used to extend an image with an additional RPM package.
PARAMS
This optional parameter is only of interest while the cash register image
is created. The value of PARAMS consists of bool options which are used
for special actions. At the time this parameter is introduced to set the
option -z only. This will cause the image to be compressed. The CDboot
linuxrc will recognize a compressed image refering to the suffix .gz. A
compressed CD image is smaller than an uncompressed one and will be
uncompressed on the fly while the image gets installed.
12.1 Preparing the CR CD-ROM Boot Image
feature
extend option
127