Table of Contents
Advertisement
18 If no Information Bar appears directly above the iManager pane, skip to
19 Click the Information Bar and select Run ActiveX Control, then click Run > Retry.
20 Repeat from
Step
12.
21 Select the sub-tab for the workstation type you are running.
You can add drivers from the system only for the workstation type you are running.
22 Click Add from System.
23 In the Add Resource dialog box, select the correct driver for the printer you plan to use for the
lab test.
24 Click OK.
25 (Optional) To test multiple printers, repeat
test.
26 When you are finished, click Apply > OK.
9.6 Creating iPrint Printer Objects
You can create iPrint Printer objects for all your printers that have drivers in the Driver Store and an
IP address or DNS name.
1 In iManager, click the Roles and Tasks icon
2 Click iPrint > Create Printer.
3 In the Printer Name field, type a name for your printer.
4 Click the Browse icon
5 Click the down-arrow
6 Click the Browse icon
7 Click the down-arrow
Description: Down Arrow icon
8 Type the DNS name or IP address of the printer in the field indicated.
9 Type a location so users know where to find the printer.
10 (Optional) Type a description.
11 Click Next.
12 Select the printer driver by using the drop-down list for the Windows platform of your lab
workstation.
13 Click Next > OK.
14 Close iManager.
15 Continue with
Chapter 10, "NetStorage," on page
Step 22
Description: Roles and Tasks icon
Description: Browse icon
Description: Down Arrow icon
Description: Browse icon
Description: Down Arrow icon
next to PRINTERS, then click iPrint_Manager.
Step
through
Step 24
for each printer you want to
next to the Container Name field.
next to LAB, then click PRINTERS.
next to the Print Manager Name field.
next to LAB, click the down-arrow
85.
21.
.
iPrint
83
Advertisement
Chapters
Table of Contents
