Novell OPEN ENTERPRISE SERVER 2 SP2 - LAB GUIDE 01-19-2010 Manual page 16

Page Name
Create Logical Volume
EVMS Configuration
Expert Partitioner
14 On the Installation Settings page, click Software.
Use the following table to navigate and configure the software pages:
Page Name
Software Selection and System
Tasks
agfa fonts
Installation Settings
Confirm Installation
15 When prompted, insert the SLES 10 media and click Retry.
If you are installing from DVD, insert DVD 1 when you are prompted for any SLES 10 media.
If you are installing from CDs, insert them in order as instructed.
After the files are copied, the system configuration takes a few minutes to complete.
16 Continue with
16 OES 2 SP2: Lab Guide for Linux and Virtualized NetWare
Action
1. In the Volume Name field, type
2. Click Max.
3. Make sure the Mount Point is set to /.
4. Click OK.
1. Click Next.
1. Click Finish.
Action
1. Under Primary Functions, deselect Print Server by
clicking it twice.
2. Under OES Services, select (or confirm the selection of)
the following:
Services marked with an asterisk (*) are selected with
AFP and CIFS.
Novell Backup/Storage Management Services (SMS),
Novell Linux User Management, and Novell Remote
Manager are all selected by default when any other
selections are made, and they are installed on every OES
2 server.
3. Click Accept.
1. Click Accept.
1. Click Accept.
1. Click Install.
Setting the Root Password, Configuring the Network, and Updating the
sys_linux
Novell AFP
Novell CIFS
Novell eDirectory*
Novell iFolder
Novell iManager
Novell iPrint
Novell NCP Server/Dynamic Storage Technology*
Novell NetStorage
Novell Storage Services*
.
Server.