Novell OPEN ENTERPRISE SERVER 2 SP2 - LAB GUIDE 01-19-2010 Manual page 18

Page Name
Password for the System
Administrator "root"
Hostname and Domain Name
Network Configuration
Network Card Configuration
Overview
Host Name and Name Server
Configuration
Network Address Setup
Routing Configuration
Network Address Setup
Network Card Configuration
Overview
Network Configuration
Test Internet Connection
18 OES 2 SP2: Lab Guide for Linux and Virtualized NetWare
Action
1. Enter and confirm the root
Next.
1. In the Host Name field, type the DNS hostname for the IP
address you are assigning to the server. For example,
myserver.
2. In the Domain Name field, type the DNS Domain Name for
your network. For example,
mysite.company.example.com.
3. Deselect Change Hostname via DHCP.
4. Click Next.
1. Click Network Interfaces.
1. If your server has multiple network cards, select the card
the server will use.
2. Click Edit.
3. Select Static Address Setup.
4. In the IP Address field, type the IP address for the server.
For example, 192.168.1.100
5. Change the Subnet Mask if needed. For example,
255.255.255.0.
6. Click Host Name and Name Server.
1. Type the IP address of at least one name server and type
your DNS domain name in the Domain Search field. For
example, company.example.com.
2. Click OK.
1. Click Routing.
1. Type the IP address of the default gateway for your lab
subnet. For example, 192.168.1.1.
2. Click OK.
1. Click Next.
1. Click Next.
1. Click Next.
You will need to register your server on the Internet to
download the latest patches, so you should test the Internet
connection at this point to make sure everything is configured
correctly.
1. Select Yes, Test Connection to the Internet.
2. Click Next.
user password, then click