Novell OPEN ENTERPRISE SERVER 2 SP2 - LAB GUIDE 01-19-2010 Manual page 15

For more information, see "Installing with EVMS as the Volume Manager of the System
Device" in the OES 2 SP2: Installation
Page Name
Suggested Partitioning
Preparing Hard Disk—Step 1
Expert Partitioner
Caution!
Expert Partitioner
Which type of partition do you
want to create?
Create a Primary Partition
Expert Partitioner
Which type of partition do you
want to create?
Create a Primary Partition
Expert Partitioner
EVMS Configuration
Create EVMS Container
EVMS Configuration
Create Logical Volume
EVMS Configuration
Guide.
Action
1. Select Create Custom Partition Setup.
2. Click Next.
1. Select Custom Partitioning (for experts).
2. Click Next.
1. Click Expert > Delete partition table and disk label.
2. When you are prompted to select a new partition table
type, click OK.
1. Click Yes.
1. Click Create.
1. Select Primary partition.
2. Click OK.
1. In the End field, type 200M
2. In the Mount Point drop-down list, select /boot.
3. Click OK.
1. Click Create.
1. Select Primary partition.
2. Click OK.
1. Select Do not format.
2. In the File system ID drop-down list, select 0x8E Linux
LVM.
3. In the End field, type
10GB
4. Click OK.
1. Click EVMS.
1. Click Create Container.
1. Select the 10 GB partition you just created.
2. Click Add Volume.
3. Click OK.
1. Click Add.
1. In the Volume Name field, type
2. In the Size field, type 512M
3. In the File System drop-down list, select Swap.
4. Click OK.
1. Click Add.
Installing the OES 2 SP2 Server in Your Lab
.
.
.
swap
.
15