Installing The Oes 2 Sp2 Server In Your Lab; Lab Setup Requirements - Novell OPEN ENTERPRISE SERVER 2 SP2 - LAB GUIDE 01-19-2010 Manual

Installing the OES 2 SP2 Server in
1
Your Lab
Use the instructions in this section to install Novell
your lab.
Section 1.1, "Lab Setup Requirements," on page 11
Section 1.2, "Obtaining Installation Media," on page 12
Section 1.3, "Installing the Server Software," on page 14
Section 1.4, "Setting the Root Password, Configuring the Network, and Updating the Server,"
on page 17
Section 1.5, "Configuring eDirectory and OES Services," on page 20
Section 1.6, "Setting Up the Graphical User Interface," on page 22
Section 1.7, "Completing the EVMS Configuration," on page 22
Section 1.8, "Setting Up the Server as an SLP Directory Agent," on page 23
Section 1.9, "Accessing iManager," on page 24
Section 1.10, "Configuring the Browser for the eDirectory CA," on page 25
Section 1.11, "Enabling Pop-Ups for iManager," on page 26

1.1 Lab Setup Requirements

For the tasks and exercises described in this guide, you need the following:
A server-class computer with the following:
Component
Processor
RAM
Display adapter
Display monitor
CD drive
Hard drive
(All data will be erased)
Network card
®
Open Enterprise Server 2 SP2 (OES 2 SP2) in
Minimum
Pentium* II or AMD* K7 450 MHz Pentium III, Pentium III Xeon*,
1 GB
Super VGA
Compatible with adapter
Support for the ElTorito
specification
20 GB
Ethernet 100 Mbps
Recommended
Pentium 4, Intel* Xeon 700 MHz,
AMD K8 CPUs (Athlon64 and
Opteron*), Intel EM64T or higher
processor
2 GB
VESA 1.2-compliant, high
resolution

Installing the OES 2 SP2 Server in Your Lab

1
11