Setting Up Role-Based Services; Updating The Imanager Plug-In Modules; Section 3.3, "Setting Up Role-Based Services; Section 3.4, "Updating The Imanager Plug-In Modules - Novell OPEN ENTERPRISE SERVER 2 SP2 - LAB GUIDE 01-19-2010 Manual

Reference Letter Explanation
During subsequent installations into the same tree, you can create new Organizational
A
Unit objects to provide a context for other OES 2 servers being installed.
If you want to specify other Admin users in the OES 2 installation parameters, you can
B
do this during the installation. Note, however, that such an Admin would probably not
be granted rights to the entire tree, only to the objects under the IS OU. Admin objects
like this are often referred to as sub-container admins.

3.3 Setting Up Role-Based Services

When iManager is installed in connection with OES 2, the administrative tasks available through the
Roles and Tasks icon are available to all users until you run the configuration wizard. In this
exercise, you create a Role-Based Services (RBS) collection that contains all of the management
roles in the tree.
When the installation process finishes as outlined below, the eDirectory Admin user is the only user
configured to perform the administrative tasks available through the Roles and Tasks icon. If you
want to create other administrative users and assign them a subset of administrative roles, you need
to create additional collections with subsets of roles and assign the other administrative users to
them. For more information, see
2.7.3 Administration Guide.
1 At your Windows workstation, log in to iManager on the OES 2 lab server, using the
eDirectory Admin user account and password. For more information, see the steps in
Section 1.9, "Accessing iManager," on page
If you receive a Tomcat error, see
2 Click the Configure icon
3 Select Role Based Services > RBS Configuration.
4 Click iManager 2.x collections > New > Collection and Setup.
5 If you are prompted to extend the schema, click Next.
6 In the Name field, type the following:
Tree Admin Role
7 Click the Browse icon
8 Click COMPANY, then click Next.
9 Click the Browse icon
10 Click EXAMPLE_TREE.
11 Click Start.
12 Do not close iManager. After the operation finishes, continue with the next section,
the iManager Plug-in Modules.

3.4 Updating the iManager Plug-in Modules

1 In the Configure pane, click Plug-in Installation > Available Novell Plug-in Modules.
"Configuring and Customizing
24.
Section A.2, "iManager Tomcat Error," on page
Description: Configure icon
Description: Browse icon
Description: Browse icon
eDirectory, Users and Groups, and Identity Services
iManager" in the Novell iManager
.
next to the Container field.
next to the Scope field.
109.
Updating
49