Configuring Ifolder Accounts And Creating Ifolders; Section 8.5, "Configuring Ifolder Accounts And Creating Ifolders - Novell OPEN ENTERPRISE SERVER 2 SP2 - LAB GUIDE 01-19-2010 Manual

If you receive a Tomcat error, see
2 Click iFolder 3.8 > Launch iFolder Admin Console.
3 In the iFolder Server field, type the IP address of the OES 2 lab server.
4 Select the Authenticate Using Current iManager Credentials option.
5 Click OK.
The Users tab shows the users that are recognized by the iFolder server as having iFolder
service access. Because the LDAP search context doesn't include the USERS container, the
eDirectory users you have added don't appear in the list.
6 Click the Servers tab.
7 Click the blue link for the OES 2 lab server.
8 In the LDAP Details section, click the Edit button.
9 In the LDAP Admin DN field, type cn=admin,o=company.
10 In the LDAP Admin Password field, type the Admin user password.
11 In the LDAP Contexts field, change
This changes the search context to the USERS directory.
12 In the LDAP Details section, click the Sync Now button.
Notice that the default synchronization interval is 1440 minutes (24 hours).
13 Click the Users tab.
Notice that the users you have created are added to the list.
14 Close the iFolder Administration console, then continue with
and Creating
8.5 Configuring iFolder Accounts and Creating
iFolders
Before users can create iFolders, they must set up an iFolder account on the workstation.
You should have already created a Windows user account for each eDirectory user as instructed in
Section 8.3, "Creating Corresponding Windows Users," on page
iFolder for linux1_lum-edir and invite the ncp_edir and nw_edir users to share the iFolder. Although
you can create accounts for the other users, there are no exercises in this guide that involve them
having iFolder accounts.
1 Log off as the administrative user, then log in to the Windows workstation as the linux1_lum-
edir user that you created in
page 75.
2 After the login process finishes, you should be prompted to set up an iFolder account. Click
Next.
If you are not prompted to set up an account, right-click the iFolder icon on the toolbar, select
Accounts, then click New.
3 In the Server Address field, type the IP address or DNS hostname of your OES 2 server, then
click Next.
4 Type the linux1_lum-edir for the username, then type the password you assigned to the user.
76 OES 2 SP2: Lab Guide for Linux and Virtualized NetWare
Section A.2, "iManager Tomcat Error," on page
SERVERS
iFolders.
Section 8.3, "Creating Corresponding Windows Users," on
to , then click OK.
USERS
Configuring iFolder Accounts
75. You will now configure an
109.