Using Ifolder - Novell OPEN ENTERPRISE SERVER 2 SP2 - LAB GUIDE 01-19-2010 Manual

ncp_edir Service Access
Table 11-4
Service
iFolder 3.8
Novell AFP
Novell CIFS
NetStorage
iPrint

11.5.2 Using iFolder

"Setting Up iFolder" on page 96
"Observing File Synchronization" on page 97
"Using iFolder Web Access" on page 97
Setting Up iFolder
linux2_lum-edir has full access to all iFolder user functionality, but for the purposes of this guide we
will accept only the invitation that was extended by linux1_lum-edir and briefly explore what is
available through that invitation.
1 At the Windows workstation, log in as ncp_edir.
2 After the iFolder Account Creation Wizard launches, click Next.
3 In the Server Address field, type the IP address or DNS name of the OES 2 lab server, then
click Next.
4 Type the username and password for ncp_edir, select Remember password on This Computer,
then click Next.
5 Click Connect.
6 If prompted, accept the certificate by clicking Yes.
96 OES 2 SP2: Lab Guide for Linux and Virtualized NetWare
Details
Can create and share its own iFolders and
accept invitations from others to share
their iFolders.
Can access any NSS directories to which
it has rights.
Access rights to directories are governed
by the NSS file system, allowing the user
to only see and do what it has rights for.
Can access any NSS directories to which
it has rights.
Access rights to directories are governed
by the NSS file system, allowing the user
to only see and do what it has rights for.
Can access its home directory through
NetStorage because all home directories
created through iManager and stored as
attributes in eDirectory are exposed
through the HOME@EXAMPLE_TREE
default storage location.
Can install and use the printer made
available in Chapter 9, "iPrint," on
page 79.
Explored for This User in This Guide
Yes
See Section 11.10, "Macintosh Exercises
and Novell AFP," on page 104.
No
Yes
No