Novell OPEN ENTERPRISE SERVER 2 SP2 - LAB GUIDE 01-19-2010 Manual page 77

5 Select Remember Password, then click Next > Connect.
6 If prompted, accept the certificate by clicking Yes.
7 When prompted to create a default iFolder, deselect Create Default Folder, click OK, click
Finish, and then close the iFolder information window.
8 Right-click the desktop, then click New and create a new folder named
.
edir_IF3
9 After creating the folder, right-click it, then click Convert to an iFolder.
10 Click OK.
11 In the message that points out how iFolder folder icons look different, select Do Not Show This
Message Again, then click Close.
12 Right-click the iFolder, then select iFolder > Share with.
13 In the iFolder Properties dialog box, click Add.
14 In the iFolder Users column, click Ncp Edir, then click Add>>.
Ncp Edir is added to the Selected Users column.
15 Add Nw Edir to the Selected Users column as well.
16 Click OK.
17 Change the access rights for Nw Edir from Read/Write to Read Only by doing the following:
17a Click Nw Edir.
17b Click Access.
17c Select Read Only.
17d Click OK.
18 Click Apply > OK.
The two users are configured to access linux1_lum-edir's iFolder.
19 Log out of the workstation.
20 Continue with
Chapter 9, "iPrint," on page 79.
linux1_lum-
iFolder 3.8 77