Obtaining Installation Media; Identifying The Files To Download - Novell OPEN ENTERPRISE SERVER 2 SP2 - LAB GUIDE 01-19-2010 Manual

Lab guide for linux and virtualized netware
Table of Contents

Advertisement

Component
IP address
Mouse
A network printer with an assigned static IP address and a connection to your lab network.
A Windows workstation with
One of the following platforms installed:
An Ethernet 100 Mbps adapter
An IP address on the same subnet as the server
Mozilla
for most of the instructions in this guide)
A print driver installed on the workstation for the network printer listed above.
(Optional for exploring Novell AFP and iPrint) An Apple* Macintosh* workstation with
Mac OS* 10.4 or later installed
Novell AFP supports earlier versions of Mac OS, but iPrint doesn't.
An Ethernet adapter
An IP address on the same subnet as the server
A print driver installed on the workstation for the network printer listed above.

1.2 Obtaining Installation Media

To complete the instructions in this guide, you need to download various ISO files, depending on
your hardware.
Section 1.2.1, "Identifying the Files to Download," on page 12
Section 1.2.2, "Downloading the Files," on page 13
Section 1.2.3, "Creating the Installation Media," on page 13

1.2.1 Identifying the Files to Download

You need to download the set of files in
your server computers:
12
OES 2 SP2: Lab Guide for Linux and Virtualized NetWare
Minimum
IP address on the lab
subnet. For example,
192.168.1.100.
Subnet mask. For example,
255.255.255.0.
Default gateway. For
example, 192.168.1.1.
Not required
Windows XP
Windows 2000
*
*
Firefox
browser installed. (This is optional, but Firefox is the assumed browser
Table 1-1
Recommended
USB or PS/2
that matches the architecture (32-bit or 64-bit) of
*

Advertisement

Table of Contents
loading

This manual is also suitable for:

Open enterprise server 2 sp2

Table of Contents