14.
Appendix - Installation of Remote Termination Panels
14.1.
Overview
The Remote Termination Panel (RTP) provides an easy way to connect the ControlEdge HC900
controller to the field wiring. The RTP integrates some of the typical externally connected components,
reducing wiring and setup time. It also minimizes the need for multiple wires under a single screw
connection by expanding the connectivity of the shared terminals of the I/O modules.
There are three RTP types:
8 Analog Input
Relay Output
16 point Analog Input/Digital Input/Digital Output/Analog Output
Figure 109 – Example installation (not shown: 2
227
HC900 Process & Safety Controller User and Installation Manual
(RTPs)
nd
RTP & cable for high capacity AI/DI/DO)
See page
222
229
232
Revision 10
May 2019