Connecting The Power Cord And Usb Cable - Kodak S1220 - Photo Scanning System User Manual

Connecting the power cord
and USB cable
2-8
When the s1220 Photo Scanning Software application has been
installed, connect the power supply, power cord and USB cable to the
scanner. Refer to the illustration below for making proper connections.
Make sure the power outlet is located within 1.52 metres (5 feet) of the
scanner and is easily accessible.
1. Select the appropriate AC power cord for your region from the
supply of power cords packed with your scanner.
2. Attach the power cord you selected to the power supply.
NOTE: Be sure that the power cord is securely attached to the
power supply.
3. Plug the output power cord from the power supply into the power
port on the scanner.
4. Plug the other end of the power cord into the wall outlet.
5. Attach the USB cable to the scanner USB port, located on the back
of the scanner.
6. Attach the other end of the USB cable to the proper USB 2.0 port on
your PC.
A-61601 February 2010