Connecting The Power Cord And Usb Cable - Kodak PS50 Series User Manual

Connecting the power cord
and USB cable
2-4
When the Picture Saver System Software has been installed, connect
the power supply, power cord and USB cable to the scanner. Refer to
the illustration below for making proper connections. Make sure the
power outlet is located within 1.52 metres (5 feet) of the scanner and is
easily accessible.
1. Select the appropriate AC power cord for your region from the
supply of power cords packed with your scanner.
2. Attach the power cord you selected to the power supply.
NOTE: Be sure that the power cord is securely attached to the
power supply.
3. Plug the output power cord from the power supply into the power
port on the scanner.
4. Plug the other end of the power cord into the wall outlet.
NOTE: The green LED on the power supply indicates the power is
on.
5. Attach the USB cable to the scanner USB port, located on the back
of the scanner.
6. Attach the other end of the USB cable to the proper USB 2.0 port on
your PC.
A-61760 September 2012