Kodak S1220 - Photo Scanning System User Manual page 73

Error Code Message
7000 Please check if WIBU runtime has been
installed. WIBU runtime (WkRuntime.exe)
can be found on the CD provided with the
Kodak scanner.
7001 License .dat file not found. Please contact
support with error code 7001.
8001 Profile error. Please verify that STW default
profile settings have not been altered. If this
error persists, please contact support with
error code 8001.
8002 Scanner name not found. Please verify that
STW default profile settings have not been
altered. If this error persists, please contact
support with error code 8002.
9001, 9002, TWAIN drivers could not be started. Please
9003 retry. If this error persists, please contact
support with error code 900X.
9004 Could not find a Kodak scanner.
9005 Please check if scanner is available to STW. Verify that the s1220 Scanner is connected and
9006, 9007, Could not connect to the scanner. Please
9008, 9010 retry. If this error persists, please contact
support with error code 900X.
9009 Could not get the image from the scanner.
Please retry. If this error persists, please
contact support with error code 9009.
9011 Could not run the scanner. Please retry. If
this error persists, please contact support
with error code 9011.
XXXX Could not connect to scanner. Please retry. If
this error persists, please contact support
with error code XXXX.
Error writing to file PrintScan.ini.
A-61601 February 2010
Description
Contact Kodak Service.
Contact Kodak Service.
Reinstall the Kodak s1220 Photo Scanning System.
Refer to Chapter 2, Installation.
Reinstall the Kodak s1220 Photo Scanning System.
Refer to Chapter 2, Installation.
Reinstall the Kodak s1220 Photo Scanning System.
Refer to the section entitled, "Installing the Kodak driver
software" in Chapter 2.
Be sure that the s1220 Scanner is attached, turned on
and the green LED is on and steady. If the error persists,
contact Kodak Service.
powered on. If the error persists, contact Kodak Service.
Reinstall the Kodak s1220 Photo Scanning System.
Refer to Chapter 2, Installation.
Contact Kodak Service.
Reinstall the Kodak s1220 Photo Scanning System.
Refer to Chapter 2, Installation.
Verify that the supplied s1220 USB software dongle is
plugged into a USB 2.0 port on the PC.
Verify that a valid PrintScan.ini file exists. Reinstall the
Kodak s1220 Photo Scanning System. Refer to the
section entitled "Application configuration" in this
chapter.
7-7