Table Of Contents - Kodak S1220 - Photo Scanning System User Manual

2 Installation
Contents
Installing the scanner
A-61601 February 2010
Installing the scanner ...................................................................... 2-1
Installation notes regarding Windows 7 and Windows XP.......... 2-2
Installing the Kodak Driver Software........................................... 2-3
Attaching the standard output tray .............................................. 2-4
Attaching the optional output tray kit .......................................... 2-5
Connecting the power cord and USB cable ................................ 2-8
Turning on the scanner ................................................................... 2-9
Starting the application software ..................................................... 2-9
Exiting the application software ...................................................... 2-9
This section provides detailed information of the Installation Guide that
is provided with your scanner. Follow these steps in the order they are
provided to install your scanner.
NOTE: If you have already performed all of the steps in the Installation
Guide, skip this section.
• Power down any scanners attached to the PC before installing the
s1220 Photo Scanning Software application.
• Install the software before connecting the scanner to the PC.
• Be sure you have administrator rights. The s1220 Photo Scanning
System application must be installed under Administrator and run
under Administrator or Standard groups.
• Close any currently running applications.
• Close any currently running applications that use a USB software
dongle before starting the s1220 Photo Scanning System installation.
• Close any scanning applications including the Scan Validation Tool
and Smart Touch.
• Remove any USB software dongle connected to the PC.
2-1