Cleaning Procedures; Cleaning The Rollers - Kodak S1220 - Photo Scanning System User Manual

Cleaning procedures

Cleaning the rollers

5-2
Your scanner needs to be cleaned periodically. If your photos do not
feed easily, if several photos feed at the same time or if streaks appear
on your images, it is time to clean your scanner. The section entitled,
"Supplies and consumables" at the end of this chapter provides a listing
of the supplies required to clean your scanner.
IMPORTANT: Use only non-flammable cleaners such as those provided
through Kodak Parts Services. Do not use household
cleaners.
Allow surfaces to cool to ambient temperature before
use. Do not use cleaners on hot surfaces.
Use adequate ventilation. Do not use cleaners in
confined areas.
NOTES:
• Before beginning cleaning procedures, disconnect the electrical
power.
• Wash your hands with soap and water after performing maintenance
procedures.
1. Open the scanner cover.
2. With a roller cleaning pad, wipe the feed rollers from side to side.
Rotate the feed rollers to clean the entire surface.
IMPORTANT: The roller cleaning pad contains sodium lauryl ether
sulfate which can cause eye irritation. Refer to the MSDS
for more information.
3. Dry the rollers with a lint-free cloth.
A-61601 February 2010