Scan Settings Screen - Kodak S1220 - Photo Scanning System User Manual

Scan Settings screen

A-61601 February 2010
The Scan Settings screen allows you to change the default settings
used in the scanning process.
Scan as — select either Color or Grayscale.
NOTE: Color scanning is recommended for most photos, including
black and white and grayscale photos, so Retouch and Sharpen
processing may be applied to the scanned images. Use
Grayscale scanning for exception processing if color scan
results are not what you desired.
Mode — select one of the following batch scan modes:
• Photo Face Up — captures the side of the photo that is face up in
the input tray. This is the recommended mode for photos.
• Photo Face Down — captures the side of the photo that is face
down in the input tray.
• Two Sided - Photo Face Up — captures both sides of the photo as
two separate image files labeled A and B.
Resolution — allows you to select the dots per inch (dpi), which affects
the size of the image. The options are: 300, 600 and 1200 dpi. The
default is 300 dpi. In most cases, 300 dpi is sufficient. Selecting 600 dpi
or 1200 dpi increases scanning and processing time.
3-7