Connecting The Power Cord And Usb Cable; Disconnecting The Power Cord - Kodak i1440 User Manual

Connecting the power cord
and USB cable
Disconnecting the
power cord
2-4
When the scanner software drivers have finished being installed,
connect the power supply, power cord and USB cable to the scanner.
Refer to the illustration below for making proper connections. Make
sure the power outlet is located within 1.52 metres (5 feet) of the
scanner and is easily accessible.
1. Select the appropriate AC power cord for your region from the
supply of power cords packed with your scanner.
2. Attach the power cord you selected to the power supply.
NOTE: Be sure that the power cord is securely attached to the
power supply.
3. Plug the output power cord from the power supply into the power
port on the scanner.
4. Plug the other end of the power cord into the wall outlet.
5. Attach the USB cable to the scanner USB port, located on the back
of the scanner.
6. Attach the other end of the USB cable to the proper USB port on
your PC.
• Place your thumb on the arrow on the collar of the power connector
and pull it away from the scanner.
A-61550 February 2010