Tuning Preset Button - Denon AVR-2805 Operating Instructions Manual

Preset memory
1
Use the "Auto tuning" or "Manual tuning"
operation to tune in the station to be preset in
the memory.
2
Press the MEMORY button.
(Remote control unit)
3
Press the SHIFT button and
select the desired memory
block (A to G).
(Remote control unit)
4
Press the CHANNEL + (UP)
or – (DOWN) button to select
the desired preset channel (1
to 8).
(Remote control unit)
5
Press the MEMORY button
again to store the station in
the preset memory.
(Remote control unit)
To preset other channels, repeat steps 2 to 5.
A total of 56 broadcast stations can be preset
— 8 stations (channels 1 to 8) in each of blocks
A to G.
Checking the preset stations
• The preset (broadcast) stations can be checked on the on screen display.
1
Press the ON SCREEN button repeatedly until
the "Tuner Preset Stations" screen appears on
the OSD.
(Remote control unit)
3
2, 5
4
1
Recalling preset stations
• Recalling preset stations from the remote control unit.
1
Watching the display, press
the SHIFT button to select
the preset memory block.
(Remote control unit)
2
Watching the display, press
the CHANNEL + (UP) or –
(DOWN) button to select the
desired preset channel.
(Remote control unit)
• Recalling preset stations from the main unit's panel.
1
Press the TUNING PRESET
button.
TUNING
PRESET
(Main unit)
2
Turn the FUNCTION knob
FUNCTION
and select the desired preset
channel.
(Main unit)
ENGLISH
1
2
1 2
49