Connecting Video Components With S-Video Jacks; Connecting Video Components With Color Difference - Denon AVR-2805 Operating Instructions Manual

ENGLISH
Connecting the video components equipped with S-Video jacks
• When making connections, also refer to the operating instructions of the other components.
• A note on the S input jacks
The input selectors for the S inputs and Video inputs work in conjunction with each other.
• The AVR-2805 is equipped with a function for converting video signals.
• The signal connected to the S-Video signal terminal is output to the composite video and component video
monitor out terminals.
• The REC OUT terminals have no conversion function, so when recording only connect the S-Video terminals.
DVD player or video disc player (VDP)
S-VIDEO
B
OUT
Connecting a DVD player or a video disc player (VDP)
DVD
• Connect the DVD player's S-Video output jack to the S-
VIDEO DVD IN jack using a S-Video connection cord.
• VDP can be connected to the VDP jacks in the same way.
• It is also possible to connect a video disc player, DVD player,
video camcorder, game machine, etc., to the V.AUX jacks.
Connect the components' audio inputs and outputs as described. (See page 5)
6
Connecting a monitor TV
MONITOR OUT
• Connect the TV's S video input (S-VIDEO INPUT) to the
MONITOR OUT jack using a S jack connection cord.
S-VIDEO Monitor TV
IN
TV or satellite broadcast tuner
S-VIDEO
B
OUT
Connecting a TV or DBS tuner
• Connect the TV's or DBS tuner's S video output jack (S-VIDEO
OUTPUT) to the S-VIDEO TV or DBS IN jack using an S-Video
connection cord.
S-VIDEO
OUT IN Video deck 1
Connecting the video decks
• Connect the video deck's S output jack (S-OUT) to the
VCR-1 IN jack and the video deck's S input jack (S-IN) to the
S-VIDEO VCR-1 OUT jack using S-Video connection cords.
• Connect the video deck's S output jack (S-OUT) to the
VCR-2 IN jack and the video deck's S input jack (S-IN) to the
S-VIDEO
VCR-2 OUT jack using S-Video connection cords.
S-VIDEO
OUT IN
Video deck 2
Connecting the video component equipped with Color Difference
(Component - Y, P /C , P
R R
• When making connections, also refer to the operating instructions of the other components.
• The signals input to the color difference (component) video jacks are not outputs to the VIDEO output jack
(yellow) or the S-Video output jack.
• Some video sources with component video outputs are labeled Y, C
terms all refer to component video color difference output.
• The function assigned to the component video input can be changed at the system setup. For details, see
"Setting the Video Input Mode". (See page 23)
DVD player
S-VIDEO COMPONENT
VIDEO OUT
B
Y C C
B R
COMPONENT
VIDEO IN
Y C
B
S-VIDEO
S-VIDEO
The Video Conversion Function
With the AVR-2805, the Video signal and the S-video
signal which were inputted are converted mutually. And
also the Video signal and the S-Video signal which were
inputted are converted into a higher quality.
The flow of the
This unit's input jacks This unit's output jacks
this unit's internal
signals.
(Color Diffrence Video jack)
(S-Video jack)
(Video jack)
/C ) Video jacks
B B
, C , or Y, Pb, Pr, or Y, R-Y, B-Y. These
B R
Connecting a DVD player
DVD IN jacks
• Connect the DVD player's color difference (component) video output jacks (COMPONENT
VIDEO OUTPUT) to the COMPONENT VIDEO-1 IN jack using 75 Ω/ohms coaxial video pin-
plug cords.
• In the same way, another video source with component video outputs such as a TV/DBS
tuner, etc., can be connected to the VIDEO-2 color difference (component) video jacks.
Monitor TV
Connecting a monitor TV
C
R
MONITOR OUT jack
• Connect the TV's color difference (component) video input jacks
(COMPONENT VIDEO INPUT) to the COMPONENT MONITOR OUT
jack using 75 Ω/ohms coaxial video pin-plug cords.
• The color difference input jacks may be indicated differently on some TVs, monitors
or video components ("C , C and Y", "R-Y, B-Y and Y", "Pr, Pb and Y", etc.). For
R B
details, carefully read the operating instructions included with the TV or other
component.
MONITOR OUT jacks
The AVR-2805 is equipped with a function for up-converting video signals.
Because of this, the AVR-2805's MONITOR OUT jack can be connected to the
monitor (TV) with a set of cables offering a higher quality connection,
regardless of how the player and the AVR-2805's video input jacks are
connected.
Generally speaking, connections using the component video jacks offer the
highest quality playback, followed by connections using the S-Video jacks, then
connections using the regular video jacks (yellow).
NOTE:
Down-converting from the component video signal to the S-
Video and composite video signal is not possible, so when not
using the component video monitor output terminal connect
the player using the S-Video or composite video input terminal.
Cautions on the video conversion function:
When the component video terminals are used to connect the
AVR-2805 with a TV (or monitor, projector, etc.) and the video
(yellow) or S video terminals are used to connect the AVR-2805
with a VTR, depending on the combination of the TV and VTR
(Color Diffrence Video jack)
the picture may flicker in the horizontal direction, be distorted,
be out of sync or not display at all when playing video tapes.
If this happens, connect a commercially available video
(S-Video jack)
stabilizer, etc., with a TBC (time base corrector) function
between the AVR-2805 and the VTR, or if your VTR has a TBC
function, turn it on.
(Video jack)