Surround Back Button - Denon AVR-2805 Operating Instructions Manual

ENGLISH
Dolby Digital mode (only with digital input) and DTS Surround mode (only
with digital input)
1
Select the input source.
Playback with a digital input
q Select an input source set to digital
(COAXIAL/OPTICAL) (see page 22).
FUNCTION
(Main unit) (Remote control unit)
w Set the input mode to "AUTO" or "DTS".
MODE
(Main unit) (Remote control unit)
2
Select the STANDARD (Dolby/DTS Surround)
mode.
SELECT
(Main unit) (Main unit) (Remote control unit)
3
42
1- q
w
1- 3 4, 5
q
1-
2
6
5
3
3
Play a program source with the
• The Dolby Digital indicator lights when playing Dolby Digital sources.
Light
2
Light • The DTS indicator lights when playing DTS sources.
Light • Press the SURROUND BACK button.
Lights when the Surround Back CH is on.
Light
2, 6
4 Display the surround parameter menu.
(Main unit)
NOTE: The display on the screen differs depending on whether you are performing the operation from
the main unit or the remote control unit.
5
Select the various parameters.
5
4, 7
(Main unit)
6
6
Adjust the parameter settings.
7
3
SELECT
w
1-
(Main unit)
7
When the surround parameters are set using
the buttons on the main unit, stop operating
buttons after completing the settings. The
settings are automatically finalized and the
normal display reappears after several seconds.
When the settings are made using the buttons
on the remote control unit, press the "ENTER"
or "SURROUND PARAMETER" button to
finish.
, mark.
(Main unit)
(Remote control unit)
Dialogue Normalization
2
The dialogue normalization function is activated
automatically when playing Dolby Digital program
sources.
Dialogue normalization is a basic function of Dolby
Digital which automatically normalizes the dialog level
(Remote control unit)
(standard level) of the signals which are recorded at
different levels for different program sources, such as
DVD, DTV and other future formats that will use Dolby
Digital.
These contents can be verified with the STATUS and
ON SCREEN button.
Display
(Remote control unit)
The number indicates the normalization level
when the currently playing program is
normalized to the standard level.
NOTE:
• When "Default" is selected and the CURSOR
left button is pressed, "CINEMA EQ." and
"D.COMP." are automatically turned off, "LFE"
is reset, and the tone is set to the default value.
(Remote control unit)