Denon AVR-2805 Operating Instructions Manual page 25

Denon user guide av surround receiver avr-2805
Hide thumbs Also See for AVR-2805:
Table of Contents

Advertisement

4-3 Setting the Auto Surround Mode
The surround mode used at last for the three types of input signals shown below is stored in the memory, and
the signal is automatically played with that surround mode the next time it is input.
Note that the surround mode setting is also stored separately for the different input sources.
q Analog and PCM 2-channel signals (STEREO)
w 2-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY PL IIx cinema)
e Multi-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY/DTS SURROUND)
Default settings are indicated in ( ).
During playback in the PURE DIRECT mode, the surround mode does not change even if the input signal is
changed.
1
Select "Auto Surround Mode" at the Advanced
Playback Menu.
(Remote control unit)
2
Press the ENTER button.
Display the Auto Surround Mode screen.
(Remote control unit)
3
Select "ON" if you want to use the auto surround mode,
"OFF" if you do not want to use it.
(Remote control unit)
4
Enter the setting.
The Advanced Playback Menu reappears.
(Remote control unit)
Contents stored in the auto surround mode can be
checked with the on-screen display.
(Remote control unit)
5
Setting the Option Setup
1
Select "Option Setup" at the System Setup Menu.
(Remote control unit)
2
Display the Option Setup Menu Screen.
(Remote control unit)
5-1 Setting the Power Amplifier Assignment
Make this setting to switch the power amplifier for the surround back channel to ZONE2.
If ZONE2 is selected, the signal that selected at ZONE2 is output at "SURR. BACK ZONE2 PREOUT" terminals.
1
Select "Power Amp Assign" at the Option Setup Menu.
(Remote control unit)
2
Press the ENTER button.
Display the Power Amp Assign screen.
(Remote control unit)
3
Select "Surround Back" to use as the surround back channel, "Zone2" to use as
Zone2 out.
(Remote control unit)
4
Enter the setting.
The Option Setup Menu reappear.
(Remote control unit)
ENGLISH
When "Surround Back" is
When "Zone2" is selected
selected
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents