Denon AVR-2805 Operating Instructions Manual page 26

ENGLISH
5-2 Setting the Zone2 Vol. Level
Set the Zone2 pre-out output level adjustment.
1
At the Option Setup Menu select "Zone2 Vol. Level".
(Remote control unit)
2
Display the Zone2 Vol. Level screen.
(Remote control unit)
3
Select the desired setting.
Variable:
The level can be adjusted freely using the buttons on the
remote control unit.
0 dB, –40 dB:
(Remote control unit)
The output level is fixed at the set level and the volume
can no longer be adjusted.
NOTE:
• When "ZONE2" is selected at System Setup Menu
"5-1. Power Amp Assign", the Zone2 vol. Level is all
set to "Variable" including preout level and this menu
is not displayed.
4
Enter the setting.
The Option Setup Menu reappears.
(Remote control unit)
26
5-3, 5-4 Setting the Trigger Out Setup
• There are two 12V DC Trigger Out outputs on the rear panel that can be used to control other devices with
compatible trigger inputs.
• Set the Trigger Out output 1 for the different input sources.
1
Select "Trigger Out 1 Setup" at the Option Setup Menu.
(Remote control unit)
2
Display to the Trigger Out 1 Setup screen.
(Remote control unit)
3
Select the Zone (MAIN or Zone2).
(Remote control unit)
4
q Select the input source. w Select "ON" or "OFF".
(Remote control unit)
5
Enter the setting
The Option Setup Menu reappears.
(Remote control unit)
Set the Trigger out 2 Setup in the same way.
(Remote control unit)