Denon AVR-2805 Operating Instructions Manual page 44

ENGLISH
Adjusting the Audio Delay
When watching a DVD or other video source, the picture on the monitor may seem delayed with respect to the
sound. In this case, adjust the audio delay to delay the sound and synchronize it with the picture.
The audio delay setting is stored separately for each input source.
1
q Select the input source.
FUNCTION
(Main unit) (Remote control unit)
w Set the input mode to "AUTO".
MODE
(Main unit) (Remote control unit)
e Select the Dolby/DTS Surround.
SELECT
(Main unit) (Main unit) (Remote control unit)
r Play a program source (DVD, etc.).
2
Press the SYSTEM SETUP button and display
the System Setup Menu.
(Remote control unit)
3
Select "Advanced Playback"
at the System Setup Menu.
(Remote control unit)
44
1- q
1- w 1- e
1- q
e
1-
3, 5
2, 9
7 7
4, 6, 8
3, 5
w
1-
4
Press the ENTER button and display the
Advanced Playback Menu.
(Remote control unit)
5
Select "Audio Delay" at the
Advanced Playback Menu.
(Remote control unit)
6
Switch to the Audio Delay
adjustment screen.
(Remote control unit)
7
Set the delay time. (0 ms ~ 200 ms)
(Remote control unit)
With a movie source, for example, adjust so
that the movement of the actors' lips is
synchronized with the sound.
8
Enter the setting.
The Advanced Playback
Menu reappears.
(Remote control unit)
9
Press the SYSTEM SETUP button to complete
the setting.
NOTE:
The audio delay setting does not apply when playing in
the EXT. IN mode or in the analog input direct mode or
stereo mode (TONE DEFEAT "ON").