Denon AVR-2805 Operating Instructions Manual page 58

ENGLISH
3. Input Setup
Input Setup
Digital In This assigns the digital input jacks for the
1
Assignment different input sources.
Ext. In
Set the Ext. In Subwoofer terminal playback
2
Subwoofer
level.
Level
Component This assigns the color difference (component)
3
In Assign video input jacks for the different input sources.
Video Input Set the input signal to be output from the monitor
4
Mode output terminal.
Auto Tuner FM stations are received automatically and stored
5
Presets in the memory.
4. Advanced Playback
Advanced Playback
Set the audio delay to delay time the sound and
1
Audio Delay
synchronize it with the picture.
Dolby Digital Turn the audio compression on or off when down-
2
Setup mixing Dolby Digital signals.
Auto
3
Surround Set the Auto surround mode function.
Mode
58
Default settings
Input
CD DVD VDP TV DBS V. AUX VCR-1
source
Digital
COAX1 COAX2 OPT1 OFF OPT2 OPT5 OPT3
Inputs
Subwoofer = +15 dB
DVD VDP TV DBS VCR-1 VCR-2 V. AUX
VIDEO VIDEO VIDEO
NONE NONE NONE NONE
1 2 3
AUTO
A1 ~ A8
87.5/89.1/98.1/108.0/90.1/90.1/90.1/90.1 MHz
B1 ~ B8 522/603/999/1404/1611 kHz, 90.1/90.1/90.1 MHz
C1 ~ C8
90.1 MHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
F1 ~ F8 90.1 MHz
G1 ~ G8 90.1 MHz
Default settings
0 ms
OFF
Auto Surround Mode = ON
5. Option Setup
Option Setup
CDR/
VCR-2 Power AMP Set this to switch the surround back channel's
1
TAPE
Assignment power amplifier for use for zone2.
OFF OPT4
This sets the output level the zone2 output jacks.
Zone2 vol.
2
This menu is not displayed, when "ZONE2" is
Level
selected at Option Setup "Power Amp Assign".
— —
Trigger Out1 Set the Trigger Out1 output for the each input
3
Setup sources.
— —
Trigger Out2 Set the Trigger Out2 output for the each input
4
Setup sources.
This sets the amount of attenuation at audio
5
Muting Level
output muting.
This sets whether or not to display the on-screen
display that appears on the monitor screen when
On Screen
6
the controls on the remote control unit or main unit
Display
are operated.
A setting to prevent flickering.
Set whether or not to lock the system setup
7
Setup Lock
settings so that they cannot be changed.
Default settings
Surround Back
Variable
ZONE=MAIN
CDR/
PHONO CD TUNER DVD VDP TV DBS VCR-1 VCR-2
TAPE
OFF OFF OFF OFF ON ON ON ON ON ON
ZONE=2
CDR/
PHONO CD TUNER DVD VDP TV DBS VCR-1 VCR-2
TAPE
ON ON ON ON ON ON ON ON ON ON
---dB (minimum)
On Screen Display = ON / Mode 1
Setup Lock = OFF
V. AUX
ON
V. AUX
ON